With the approval of the State Certification and Accreditation Administration, the newly revised implementation rules for the compulsory certification of fire protection products ("Compulsory Product Certification Implementation Rules for Fire Alarm Products", "Compulsory Product Certification Implementation Rules for Fire Protection Products", and "Compulsory Product Certification Implementation Rules for Fire Extinguishment" Equipment Products "and" Compulsory Product Certification Implementation Rules for Fire Equipment Products ") were implemented on September 1, 2014. As the designated certification body of the State Certification and Accreditation Administration, our center has prepared the detailed rules for the implementation of the mandatory certification of fire products used in conjunction with the above mandatory product certification implementation rules (see the relevant content in the "rules and standards" column of www.cccf.net.cn) ), And will be implemented together on September 1. In order to carry out the compulsory certification of fire protection products in accordance with the law and to safeguard the legitimate rights and interests of the certification client, the relevant matters are notified as follows:
I. Entrusted bidding for the compulsory certification of fire protection products shall be carried out through the "Fire Products Online Certification Business System". Taking into account the different needs of the first-time entrusting unit and the units that have been entrusted and have obtained the compulsory certification certificate, type approval certificate, and product certification certificate, the "Fire Products Online Certification Business System" currently uses two versions at the same time, namely: Certification Business System "(2014 version) and" Fire Products Online Certification Business System "(old version). For the first time certification certification, the "Fire Products Online Certification Business System" (2014 version) should be used for certification commissioning; those who have already commissioned and have obtained compulsory certification certificates, type approval certificates, and product certification certificates during the certification process , Currently continues to use the "Fire Products Online Certification Business System" (old version) for certification entrustment.
2. Manufacturers and production enterprises who have already held the compulsory certification certificate and type approval certificate for fire protection products should carefully study the new version of the compulsory certification implementation rules and implementation rules to ensure that the quality assurance capability meets the requirements and that the product quality meets the certification standards. Our center will carry out certificate conversion work in stages and in batches according to the validity of the certificate. Relevant training, conversion work arrangements and quality assurance ability requirements, product quality confirmation requirements, product consistency control requirements, etc. during the conversion process will be on our center website (www.cccf.net.cn) and "Fire Products Online Certification Business System" Released in due course. Our center will give full consideration to reducing the burden on enterprises. If the certificate is in good condition after obtaining the certificate, the certificate conversion work will be exempted from factory inspection and product inspection in principle. For the compulsory certification certificate and type approval certificate in the suspended state, the certificated enterprise must complete the rectification of the non-conformities and submit a certificate restoration commission or certificate cancellation commission to our center within the prescribed time limit. Only after the certificate is valid or cancelled, can the certificate conversion work be carried out.
The type approval certificate will be converted before August 31, 2015. Certificates that do not meet the conversion requirements will be cancelled.
3. For producers and manufacturers that hold automatic search sprinkler products, pre-action alarm valve products, and micro-water mist fire extinguishing equipment product certification certificates, they can apply to the designated laboratory for inspection report confirmation according to the certification standards. The designated laboratory shall re-issue the type test report that meets the certification standards. For items that meet the technical requirements, inspection methods and certification standards, no additional inspection fees shall be charged. If it is confirmed to be qualified, the compulsory certification certificate shall be renewed in batches according to the plan in accordance with the work program and requirements for product certification certificate conversion stipulated by our center. The above product certification certificates will be converted before August 31, 2015. Certificates that do not meet the requirements for conversion will be cancelled.
4. For the certification client holding the "compulsory inspection report", the designated laboratory that issued the inspection report should be contacted first (if the inspection report is issued by a non-designated laboratory, the designated laboratory should also be contacted). The inspection report confirms the working procedures and requires the confirmation work to be carried out. After the designated laboratory confirms that the inspection report meets the requirements of the compulsory certification implementation rules and regulations, the certification client may directly submit an initial certification commission to our center based on the inspection report and the confirmation document (if applicable) issued by the designated laboratory. Product type test.
V. As of the date of this notice, our center will no longer accept the implementation rules of the old version of the mandatory certification implementation rules, type approval implementation rules, fire protection product certification implementation rules (automatic search for sprinkler products, pre-action alarm valve products) , Micro-water mist droplet fire extinguishing equipment products) submitted the initial certification commission. However, for other certification commissions submitted by certified companies, our center will continue to accept them normally before May 31, 2015.
6. The compulsory certification certificate, fire product type approval certificate and fire product certification certificate issued by our center before the conversion will continue to be valid. The certificate status can be checked through China Fire Products Information Network (www.cccf.com.cn).
7. If you have any questions, please call our certification office. contact number:
Fire alarm products: 010-67283071 (direct dial), 307 (ext.)
Fire extinguishing equipment products: 010-87276298 (direct dial), 303 (ext.)
Fire protection products: 010-67283071 (direct dial), 305 (ext.)
Fire equipment products: 010-87276298 (direct dial), 308 (ext.)
Switchboard of our center: 010-67274308, 67274320
Attachment: designated business scope and contact information of each designated laboratory
August 20, 2014